Connect with us

The Conversation

NASA’s mission to an ice-covered moon will contain a message between water worlds

Published

on

NASA’s mission to an ice-covered moon will contain a message between water worlds

An illustration of the Europa Clipper spacecraft, which will head to Jupiter’s moon Europa.
NASA/JPL-Caltech

Douglas Vakoch, California Institute of Integral Studies

NASA’s Europa Clipper spacecraft, headed to Jupiter’s ice-covered moon Europa in October 2024, will carry a laser-etched message that celebrates humanity’s connection to water. The message pays homage to past NASA missions that carried similar messages.

As the president of Messaging Extraterrestrial Intelligence, or METI, International, I helped design the message on Clipper with two fellow members of our board of directors: linguists Sheri Wells-Jensen and Laura Buszard-Welcher. METI International is a scientific organization dedicated to transmitting powerful radio messages to extraterrestrial life.

We collected audio recordings in 103 languages, and we decided how to convert these into waveforms that show these sounds visually. Colleagues from NASA etched these waveforms into the metal plate that shields the spacecraft’s sensitive electronics from Jupiter’s harsh radiation.

I also designed another part of the message that visually depicts the wavelengths of water’s constituents, because water is so important to the search for intelligent life in the universe.

NASA’s design for the Clipper message heading to Jupiter’s moon Europa.

Etching messages into spacecraft isn’t a new practice, and Clipper’s message fits into a decades-old tradition started by astronomer Carl Sagan.

In 1972 and 1973, two Pioneer spacecraft headed to Jupiter and Saturn carrying metal plaques engraved with scientific and pictorial messages. In 1977, two Voyager spacecraft headed to Jupiter, Saturn, Uranus and Nepture bearing gold-plated copper phonograph records. These records contained tutorials in mathematics and chemistry, as well as music, photos and sounds of Earth and greetings in 55 languages.

Water words

As water is essential for life on Earth, searching for its presence elsewhere has been key to many NASA missions. Astronomers suspect that Europa, where Clipper is headed, has an ocean underneath its icy surface, making it a prime candidate for the search for life in the outer solar system.

Part of the Clipper message features the word for water in 103 languages. We started with audio files collected online, but we then needed to analyze those and find an output that could be engraved on a metal plate. I ended up going back to some of the techniques I used in some of my early psycholinguistic research, where I explored how emotions are encoded in speech.

The 103 spoken words we recorded represent a global snapshot of the diversity of Earth’s languages. The outward-facing side of the Clipper plate shows the words as waveforms that track the varying intensity of sound as each word is spoken.

Each person whom we recorded saying the word “water” for the waveform had a connection to water. For example, the lawyer who contributed the word for water in Uzbek – “suv” – organizes an annual music festival in Uzbekistan to raise awareness of the desertification of the Aral Sea.

The native speaker of the Catalan water word – “aigua” – hunts for exoplanets, discovering potentially habitable planets that orbit other stars.

The Drake Equation

Clipper’s message also pays homage to astronomer Frank Drake, the father of SETI – the Search for Extraterrestrial Intelligence – by bearing the Drake Equation, his namesake formula. By drawing on scientific data, as well as some best guess hunches, the Drake Equation estimates the number of extraterrestrial civilizations in the galaxy currently sending messages into the cosmos.

By one widely quoted estimate, there are a tenth as many of these extraterrestrial civilizations as one’s average lifetime in years. If civilizations survive for a million years, for example, there should be about 100,000 in the galaxy. If they last only a century on average, scientists would estimate that about 10 exist.

Radio astronomers study the universe by examining the radiation that chemical elements in space give off. They spend much of their time mapping the distribution of the most abundant chemical in the universe – hydrogen.

Hydrogen emits radiation at a certain frequency called the hydrogen line, which radio telescopes can detect. During Project Ozma, the first modern-day SETI experiment, Drake looked for artificial signals at the same frequency, because he figured scientists on other worlds might recognize hydrogen as universally significant and broadcast signals at that frequency.

The water hole

As our team developed our water words message, I realized that the message would only make sense if it were discovered by someone already familiar with the contents inscribed on the plate. The Drake Equation would only make sense if someone already knew what each of the terms in the equation stood for.

The Europa Clipper will crash into Jupiter or one of its other moons, with Ganymede or Callisto the leading candidates. But if for some reason the mission changes and it survives that fate, then humans far in the future with a radically different cultural background and different language conventions may retrieve it millennia from now as an ancient artifact.

To ensure we had at least one part of the message that a distant future scientist might be able to understand, I also designed a pictorial representation of the same frequency that Drake used for Project Ozma: the hydrogen line. We engraved this on the Clipper plate, along with a frequency called the hydroxyl line.

When hydrogen (H+) and hydroxyl (OH-) combine, they form water. Scientists call the range of frequencies between these lines the “water hole.” The water hole represents the part of the radio spectrum where astronomers conducted the first SETI experiments.

We displayed the hydrogen and hydroxyl lines using their wavelengths in the Clipper message. The metal plate also has diagrams showing what hydrogen and hydroxyl look like at the atomic level.

We’re hoping that future chemists would recognize these chemical components as the ingredients of water. If they do, we will have succeeded in communicating at least a few core scientific concepts across time, space and language.

Waveforms let our team tie the messages on the two sides of the Clipper plate together. On the water words side, over a hundred words are depicted by their waveforms. On the other side, the wavelengths of hydrogen and hydroxyl – the constituents of water – are etched into the plate.

METI International funded the collection and curation of the water words, as well as my design of the hydrogen and hydroxyl lines, providing these to NASA at no cost.

While designing the message for the Europa Clipper, we got to reflect on the importance of water on Earth, and think about why astronomers feel so compelled to search for it beneath the icy crust of Jupiter’s moon Europa. The spacecraft is scheduled to enter Jupiter’s orbit in April 2030.The Conversation

Douglas Vakoch, President, METI International; Professor Emeritus, California Institute of Integral Studies

This article is republished from The Conversation under a Creative Commons license. Read the original article.

The Conversation

How is paint made?

Published

on

theconversation.com – Dawn Rogala, Paintings Conservator and Program Manager, Smithsonian Institution – 2025-09-08 07:07:00


Paint is made by mixing pigments—colorful substances found in rocks, plants, insects, or made synthetically—with binders that help spread and hold the color on surfaces. Traditionally, artists combined pigments with natural materials like water or oil, while modern factories produce large quantities with synthetic additives for durability. The paint’s ingredients depend on who uses it, its purpose, application method, and environment. Beyond art, paints protect objects like houses and cars. Smithsonian conservators study painted artifacts to learn about history using techniques like X-rays and 3D scans, helping preserve cultural heritage and uncovering stories behind materials and methods.

Protective paint sprayed onto a steel plate in a factory will have a different recipe than paint used in an art class.
gilaxia/E+ via Getty Images

Dawn Rogala, Smithsonian Institution and Gwénaëlle Kavich, Smithsonian Institution

Curious Kids is a series for children of all ages. If you have a question you’d like an expert to answer, send it to curiouskidsus@theconversation.com.


How is paint made? – Atharva, age 11, Bengaluru, India


Did you ever mix dirt and water when you were playing outside? You made a paint. Did you draw shapes on the ground with your muddy hands? You made a painting.

Paint is made by combining a colorful substance – a pigment – with another material that binds the color together and helps spread that color onto surfaces such as paper, fabric or wood. Pigments can be found everywhere – in rocks and minerals, plants or insects. Some colors are made by scientists in laboratories.

Long ago, artists made their own paints by mixing pigments with natural materials such as water, oil or egg yolk to hold the colors together in a paste. Artists today can still make their own paints, or they can order them from factories that mix, package and ship paint all over the world. Paint companies use large, industrial machines to grind pigments and binders together; these commercial paints include synthetic materials and preservatives to control the paint’s behavior and to help paint last longer in tubes or cans.

Paints and coatings do many jobs beyond just coloring paper in an artist’s studio. They are also used as protective coatings to shield houses and cars from the sun or the cold, or as a barrier between boats and the water that surrounds their wood, metal or plastic parts. Where and how a paint will be used influence how it’s made and with what ingredients.

an open box of watercolor paints with splatters of color on the case
Watercolor sets like this one used by artist Alma Thomas can be found in art classrooms around the world.
Anacostia Community Museum, Smithsonian Institution, Gift of David Driskell, CC BY

Choosing the right materials

A lot of questions need to be answered before materials are chosen for a paint.

  • Who will use the paint? An artist, a house painter, an armadillo, a robot at an assembly plant?
  • Why is the paint being used? For museum paintings and sculptures? In designs for furniture or mailboxes?
  • How will the paint be applied? By brush, by spray, or some other way?
  • Where and when will the paint be used? Does it need to dry quickly or slowly? Will the painted surface get really cold or hot? Is the paint safe for kids to use at home or school?
  • What should the paint look like? Should the dried paint be shiny or matte? Should the surface be lumpy, or should it flatten and level out? Should the colors be bright or dull? Should the paint layers be opaque, transparent or almost clear? Does the paint need to hold up against scuffs and stains?

There are many different companies that design and make the wide range of paints used around the world for all these various applications. Experts at each manufacturer understand their special type of paint, how the paint materials are measured and mixed, and the best ways to store and apply the paint. A single factory can make tens of thousands of gallons of paint each day, and paint companies produce millions of tubes of paint every year.

two boards with various colors of paint dried on them along with multiple paint brushes
Artist Thomas Moran’s palettes and brushes illustrate the way an artist mixes different paints to find just the desired qualities.
Smithsonian American Art Museum, Bequest of Miss Ruth B. Moran

Using paint to learn about the past

We work at the Smithsonian’s Museum Conservation Institute, where we study and conserve the diverse collection of painted objects at the Smithsonian – from planes and spacecraft to portraits of presidents and maps covered in abstract swirls of color. Bright coatings are part of everything from the painted clothing and cultural items of Native peoples to the pots and pans used by chef Julia Child.

Art conservators and conservation scientists like us work together to study and preserve cultural heritage such as paintings and painted objects. Studying paint helps us learn about the past and protect this history for future generations.

The paint colors used on large, traditional Indian paintings called “pichwai,” for example, include pigments gathered from around the world. They can reveal information about ancient manufacturing and how communities that lived far apart exchanged goods and knowledge.

There are many techniques to investigate artwork, from looking at small pieces of paint under a microscope to using more complicated equipment to analyze materials exposed to different types of energy. For example, we can use X-ray, infrared or ultraviolet imaging to identify different pigments in a painting.

three side by side images of the same painting, but one looks very dark, one is colorful, and one is grey and white
Conservation scientists will image the same work of art, such as this Indian pichwai, using ultraviolet fluorescence (left), visible light (middle) and infrared light (right).
National Museum of Asian Art, Smithsonian Institution, Gift of Karl B. Mann, S1992.28, Department of Conservation and Scientific Research, Orthomosaics and UV Fluorescence

Research on an Alaskan Tlingit crest hat made in the 1800s looked at the molecules in paint binders, combined with 3D scanning, to help clan members replicate the hat for ceremonial use.

Unusual uses bring conservation challenges

Artists use all sorts of materials in their artwork that were designed for other purposes. Some 19th- and early 20th-century sculptures were painted with laundry bluing – a material that used blue pigment to brighten clothes during washing. In the 1950s, artists started using thin, quick-drying house paint in their paintings.

When paints are used in a way that was not part of their design, strange things can happen. Paints made to be applied in thin layers but instead are used in thick layers can wrinkle and pucker as they dry. Paints designed to stick to rough wood can curl or lift away from slick surfaces. The colors and ingredients in paint can also fade or darken over time. Some artists want these different effects in their artwork; some artists are surprised when paints don’t behave the way they expected.

Art conservators and conservation scientists use information about artists and their paints to understand why artworks are faded, broken or acting in surprising ways, and they use that knowledge to slow or stop the damage. We can even clean some kinds of damage with lasers.

The more we know about paint, the more we learn about the past lives of painted objects and how to keep those objects around for a long, long time.


Hello, curious kids! Do you have a question you’d like an expert to answer? Ask an adult to send your question to CuriousKidsUS@theconversation.com. Please tell us your name, age and the city where you live.

And since curiosity has no age limit – adults, let us know what you’re wondering, too. We won’t be able to answer every question, but we will do our best.The Conversation

Dawn Rogala, Paintings Conservator and Program Manager, Smithsonian Institution and Gwénaëlle Kavich, Conservation Scientist, Smithsonian Institution

This article is republished from The Conversation under a Creative Commons license. Read the original article.

Read More

The post How is paint made? appeared first on theconversation.com



Note: The following A.I. based commentary is not part of the original article, reproduced above, but is offered in the hopes that it will promote greater media literacy and critical thinking, by making any potential bias more visible to the reader –Staff Editor.

Political Bias Rating: Centrist

The content is an educational piece explaining how paint is made and used, with no evident political agenda or bias. It focuses on scientific, historical, and artistic aspects in a neutral and informative manner, suitable for a general audience including children. There is no indication of leaning toward any political ideology or partisan perspective.

Continue Reading

The Conversation

Scientific objectivity is a myth – cultural values and beliefs always influence science and the people who do it

Published

on

theconversation.com – Sara Giordano, Associate Professor of Interdisciplinary Studies, Kennesaw State University – 2025-09-04 07:53:00


The article explores the myth of scientific objectivity, showing how science is deeply intertwined with cultural values and social context. It challenges traditional views, such as the passive egg and active sperm narrative, revealing that scientific knowledge often reflects societal norms. Science emerged as a quest for objectivity within Western universities over centuries, but the strict division between subjective humanities and objective sciences is arbitrary and hierarchical. Scientists, being cultural beings, influence research choices and interpretations unconsciously. Contemporary controversies, like vaccine debates, highlight the impossibility of bias-free science. Instead, democratic, collaborative processes are advocated to align research with societal values, fostering more honest and inclusive scientific inquiry.

People are at the heart of the scientific enterprise.
Matteo Farinella, CC BY-NC

Sara Giordano, Kennesaw State University

Even if you don’t recall many facts from high school biology, you likely remember the cells required for making babies: egg and sperm. Maybe you can picture a swarm of sperm cells battling each other in a race to be the first to penetrate the egg.

For decades, scientific literature described human conception this way, with the cells mirroring the perceived roles of women and men in society. The egg was thought to be passive while the sperm was active.

The opening credits of the 1989 movie ‘Look Who’s Talking’ animated this popular narrative, with speaking sperm rushing toward the nonverbal egg to be the first to fertilize it.

Over time, scientists realized that sperm are too weak to penetrate the egg and that the union is more mutual, with the two cells working together. It’s no coincidence that these findings were made in the same era when new cultural ideas of more egalitarian gender roles were taking hold.

Scientist Ludwik Fleck is credited with first describing science as a cultural practice in the 1930s. Since then, understanding has continued to build that scientific knowledge is always consistent with the cultural norms of its time.

Despite these insights, across political differences, people strive for and continue to demand scientific objectivity: the idea that science should be unbiased, rational and separable from cultural values and beliefs.

When I entered my Ph.D. program in neuroscience in 2001, I felt the same way. But reading a book by biologist Anne Fausto-Sterling called “Sexing the Body” set me down a different path. It systematically debunked the idea of scientific objectivity, showing how cultural ideas about sex, gender and sexuality were inseparable from the scientific findings. By the time I earned my Ph.D., I began to look more holistically at my research, integrating the social, historical and political context.

From the questions scientists begin with, to the beliefs of the people who conduct the research, to choices in research design, to interpretation of the final results, cultural ideas constantly inform “the science.” What if an unbiased science is impossible?

Emergence of idea of scientific objectivity

Science grew to be synonymous with objectivity in the Western university system only over the past few hundred years.

In the 15th and 16th centuries, some Europeans gained traction in challenging the religiously ordained royal order. Consolidation of the university system led to shifts from trust in religious leaders interpreting the word of “god,” to trust in “man” making one’s own rational decisions, to trust in scientists interpreting “nature.” The university system became an important site for legitimizing claims through theories and studies.

Previously, people created knowledge about their world, but there were not strict boundaries between what are now called the humanities, such as history, English and philosophy, and the sciences, including biology, chemistry and physics. Over time, as questions arose about how to trust political decisions, people split the disciplines into categories: subjective versus objective. The splitting came with the creation of other binary oppositions, including the closely related emotionality/rationality divide. These categories were not simply seen as opposite, but in a hierarchy with objectivity and rationality as superior.

A closer look shows that these binary systems are arbitrary and self-reinforcing.

Science is a human endeavor

The sciences are fields of study conducted by humans. These people, called scientists, are part of cultural systems just like everyone else. We scientists are part of families and have political viewpoints. We watch the same movies and TV shows and listen to the same music as nonscientists. We read the same newspapers, cheer for the same sports teams and enjoy the same hobbies as others.

All of these obviously “cultural” parts of our lives are going to affect how scientists approach our jobs and what we consider “common sense” that does not get questioned when we do our experiments.

Beyond individual scientists, the kinds of studies that get conducted are based on what questions are deemed relevant or not by dominant societal norms.

For example, in my Ph.D. work in neuroscience, I saw how different assumptions about hierarchy could influence specific experiments and even the entire field. Neuroscience focuses on what is called the central nervous system. The name itself describes a hierarchical model, with one part of the body “in charge” of the rest. Even within the central nervous system, there was a conceptual hierarchy with the brain controlling the spinal cord.

My research looked more at what happened peripherally in muscles, but the predominant model had the brain at the top. The taken-for-granted idea that a system needs a boss mirrors cultural assumptions. But I realized we could have analyzed the system differently and asked different questions. Instead of the brain being at the top, a different model could focus on how the entire system communicates and works together at coordination.

Every experiment also has assumptions baked in – things that are taken for granted, including definitions. Scientific experiments can become self-fulfilling prophecies.

For example, billions of dollars have been spent on trying to delineate sex differences. However, the definition of male and female is almost never stated in these research papers. At the same time, evidence mounts that these binary categories are a modern invention not based on clear physical differences.

But the categories are tested so many times that eventually some differences are discovered without putting these results into a statistical model together. Oftentimes, so-called negative findings that don’t identify a significant difference are not even reported. Sometimes, meta-analyses based on multiple studies that investigated the same question reveal these statistical errors, as in the search for sex-related brain differences. Similar patterns of slippery definitions that end up reinforcing taken-for-granted assumptions happen with race, sexuality and other socially created categories of difference.

Finally, the end results of experiments can be interpreted in many different ways, adding another point where cultural values are injected into the final scientific conclusions.

Settling on science when there’s no objectivity

Vaccines. Abortion. Climate change. Sex categories. Science is at the center of most of today’s hottest political debates. While there is much disagreement, the desire to separate politics and science seems to be shared. On both sides of the political divide, there are accusations that the other side’s scientists cannot be trusted because of political bias.

RFK Jr, Donald Trump and Dr. Oz seated at a table with flags behind them
It can be easier to spot built-in bias in scientific perspectives that conflict with your own values.
Jim Watson/AFP via Getty Images

Consider the recent controversy over the U.S. Centers for Disease Control and Prevention’s vaccine advisory panel. Secretary of Health and Human Services Robert F. Kennedy Jr. fired all members of the Advisory Committee on Immunization Practices, saying they were biased, while some Democratic lawmakers argued back that his move put in place those who would be biased in pushing his vaccine-skeptical agenda.

If removing all bias is impossible, then, how do people create knowledge that can be trusted?

The understanding that all knowledge is created through cultural processes does allow for two or more differing truths to coexist. You see this reality in action around many of today’s most controversial subjects. However, this does not mean you must believe all truths equally – that’s called total cultural relativism. This perspective ignores the need for people to come to decisions together about truth and reality.

Instead, critical scholars offer democratic processes for people to determine which values are important and for what purposes knowledge should be developed. For example, some of my work has focused on expanding a 1970s Dutch model of the science shop, where community groups come to university settings to share their concerns and needs to help determine research agendas. Other researchers have documented other collaborative practices between scientists and marginalized communities or policy changes, including processes for more interdisciplinary or democratic input, or both.

I argue a more accurate view of science is that pure objectivity is impossible. Once you leave the myth of objectivity behind, though, the way forward is not simple. Instead of a belief in an all-knowing science, we are faced with the reality that humans are responsible for what is researched, how it is researched and what conclusions are drawn from such research.

With this knowledge, we have the opportunity to intentionally set societal values that inform scientific investigations. This requires decisions about how people come to agreements about these values. These agreements need not always be universal but instead can be dependent on the context of who and what a given study might affect. While not simple, using these insights, gained over decades of studying science from both within and outside, may force a more honest conversation between political positions.The Conversation

Sara Giordano, Associate Professor of Interdisciplinary Studies, Kennesaw State University

This article is republished from The Conversation under a Creative Commons license. Read the original article.

Alternative views on the relationship between science and culture.
Sara Giordano

Science is a human endeavor

The sciences are fields of study conducted by humans. These people, called scientists, are part of cultural systems just like everyone else. We scientists are part of families and have political viewpoints. We watch the same movies and TV shows and listen to the same music as nonscientists. We read the same newspapers, cheer for the same sports teams and enjoy the same hobbies as others.

All of these obviously “cultural” parts of our lives are going to affect how scientists approach our jobs and what we consider “common sense” that does not get questioned when we do our experiments.

Beyond individual scientists, the kinds of studies that get conducted are based on what questions are deemed relevant or not by dominant societal norms.

For example, in my Ph.D. work in neuroscience, I saw how different assumptions about hierarchy could influence specific experiments and even the entire field. Neuroscience focuses on what is called the central nervous system. The name itself describes a hierarchical model, with one part of the body “in charge” of the rest. Even within the central nervous system, there was a conceptual hierarchy with the brain controlling the spinal cord.

My research looked more at what happened peripherally in muscles, but the predominant model had the brain at the top. The taken-for-granted idea that a system needs a boss mirrors cultural assumptions. But I realized we could have analyzed the system differently and asked different questions. Instead of the brain being at the top, a different model could focus on how the entire system communicates and works together at coordination.

Every experiment also has assumptions baked in – things that are taken for granted, including definitions. Scientific experiments can become self-fulfilling prophecies.

For example, billions of dollars have been spent on trying to delineate sex differences. However, the definition of male and female is almost never stated in these research papers. At the same time, evidence mounts that these binary categories are a modern invention not based on clear physical differences.

But the categories are tested so many times that eventually some differences are discovered without putting these results into a statistical model together. Oftentimes, so-called negative findings that don’t identify a significant difference are not even reported. Sometimes, meta-analyses based on multiple studies that investigated the same question reveal these statistical errors, as in the search for sex-related brain differences. Similar patterns of slippery definitions that end up reinforcing taken-for-granted assumptions happen with race, sexuality and other socially created categories of difference.

Finally, the end results of experiments can be interpreted in many different ways, adding another point where cultural values are injected into the final scientific conclusions.

Settling on science when there’s no objectivity

Vaccines. Abortion. Climate change. Sex categories. Science is at the center of most of today’s hottest political debates. While there is much disagreement, the desire to separate politics and science seems to be shared. On both sides of the political divide, there are accusations that the other side’s scientists cannot be trusted because of political bias.

RFK Jr, Donald Trump and Dr. Oz seated at a table with flags behind them

It can be easier to spot built-in bias in scientific perspectives that conflict with your own values.
Jim Watson/AFP via Getty Images

Consider the recent controversy over the U.S. Centers for Disease Control and Prevention’s vaccine advisory panel. Secretary of Health and Human Services Robert F. Kennedy Jr. fired all members of the Advisory Committee on Immunization Practices, saying they were biased, while some Democratic lawmakers argued back that his move put in place those who would be biased in pushing his vaccine-skeptical agenda.

If removing all bias is impossible, then, how do people create knowledge that can be trusted?

The understanding that all knowledge is created through cultural processes does allow for two or more differing truths to coexist. You see this reality in action around many of today’s most controversial subjects. However, this does not mean you must believe all truths equally – that’s called total cultural relativism. This perspective ignores the need for people to come to decisions together about truth and reality.

Instead, critical scholars offer democratic processes for people to determine which values are important and for what purposes knowledge should be developed. For example, some of my work has focused on expanding a 1970s Dutch model of the science shop, where community groups come to university settings to share their concerns and needs to help determine research agendas. Other researchers have documented other collaborative practices between scientists and marginalized communities or policy changes, including processes for more interdisciplinary or democratic input, or both.

I argue a more accurate view of science is that pure objectivity is impossible. Once you leave the myth of objectivity behind, though, the way forward is not simple. Instead of a belief in an all-knowing science, we are faced with the reality that humans are responsible for what is researched, how it is researched and what conclusions are drawn from such research.

With this knowledge, we have the opportunity to intentionally set societal values that inform scientific investigations. This requires decisions about how people come to agreements about these values. These agreements need not always be universal but instead can be dependent on the context of who and what a given study might affect. While not simple, using these insights, gained over decades of studying science from both within and outside, may force a more honest conversation between political positions.

Read More

The post Scientific objectivity is a myth – cultural values and beliefs always influence science and the people who do it appeared first on theconversation.com



Note: The following A.I. based commentary is not part of the original article, reproduced above, but is offered in the hopes that it will promote greater media literacy and critical thinking, by making any potential bias more visible to the reader –Staff Editor.

Political Bias Rating: Center-Left

The content emphasizes the influence of cultural and social values on scientific research, challenging the notion of pure scientific objectivity. It highlights themes such as gender equality, critiques of traditional hierarchies, and the social construction of categories like sex and race, which are commonly associated with progressive or center-left perspectives. While it acknowledges political divides and calls for democratic, inclusive approaches to science, the overall framing aligns with a center-left viewpoint that values social context and equity in knowledge production.

Continue Reading

The Conversation

AI is transforming weather forecasting − and that could be a game changer for farmers around the world

Published

on

theconversation.com – Paul Winters, Professor of Sustainable Development, University of Notre Dame – 2025-09-03 07:30:00


Climate change intensifies weather risks for farmers, affecting crop yields and incomes, especially in low- and middle-income countries lacking accurate forecasts due to costly traditional models. AI-powered weather forecasting offers a breakthrough by delivering accurate, localized predictions rapidly and inexpensively, using far less computational power than physics-based systems. Advanced AI models like Pangu-Weather and GraphCast now match or surpass traditional forecasts, enabling timely, high-resolution weather guidance on standard computers. To be effective, AI forecasts must be tailored to local agricultural needs and disseminated through accessible channels. Supported by organizations such as AIM for Scale, AI forecasting can empower developing countries to adapt farming practices and improve resilience amid climate change.

Weather forecasts help farmers figure out when to plant, where to use fertilizer and much more.
Maitreya Shah/Studio India

Paul Winters, University of Notre Dame and Amir Jina, University of Chicago

For farmers, every planting decision carries risks, and many of those risks are increasing with climate change. One of the most consequential is weather, which can damage crop yields and livelihoods. A delayed monsoon, for example, can force a rice farmer in South Asia to replant or switch crops altogether, losing both time and income.

Access to reliable, timely weather forecasts can help farmers prepare for the weeks ahead, find the best time to plant or determine how much fertilizer will be needed, resulting in better crop yields and lower costs.

Yet, in many low- and middle-income countries, accurate weather forecasts remain out of reach, limited by the high technology costs and infrastructure demands of traditional forecasting models.

A new wave of AI-powered weather forecasting models has the potential to change that.

A farmer in a field holds a dried out corn stalk.
A farmer holds dried-up maize stalks in his field in Zimbabwe on March 22, 2024. A drought had caused widespread water shortages and crop failures.
AP Photo/Tsvangirayi Mukwazhi

By using artificial intelligence, these models can deliver accurate, localized predictions at a fraction of the computational cost of conventional physics-based models. This makes it possible for national meteorological agencies in developing countries to provide farmers with the timely, localized information about changing rainfall patterns that the farmers need.

The challenge is getting this technology where it’s needed.

Why AI forecasting matters now

The physics-based weather prediction models used by major meteorological centers around the world are powerful but costly. They simulate atmospheric physics to forecast weather conditions ahead, but they require expensive computing infrastructure. The cost puts them out of reach for most developing countries.

Moreover, these models have mainly been developed by and optimized for northern countries. They tend to focus on temperate, high-income regions and pay less attention to the tropics, where many low- and middle-income countries are located.

A major shift in weather models began in 2022 as industry and university researchers developed deep learning models that could generate accurate short- and medium-range forecasts for locations around the globe up to two weeks ahead.

These models worked at speeds several orders of magnitude faster than physics-based models, and they could run on laptops instead of supercomputers. Newer models, such as Pangu-Weather and GraphCast, have matched or even outperformed leading physics-based systems for some predictions, such as temperature.

A woman in a red sari tosses pellets into a rice field.
A farmer distributes fertilizer in India.
EqualStock IN from Pexels

AI-driven models require dramatically less computing power than the traditional systems.

While physics-based systems may need thousands of CPU hours to run a single forecast cycle, modern AI models can do so using a single GPU in minutes once the model has been trained. This is because the intensive part of the AI model training, which learns relationships in the climate from data, can use those learned relationships to produce a forecast without further extensive computation – that’s a major shortcut. In contrast, the physics-based models need to calculate the physics for each variable in each place and time for every forecast produced.

While training these models from physics-based model data does require significant upfront investment, once the AI is trained, the model can generate large ensemble forecasts — sets of multiple forecast runs — at a fraction of the computational cost of physics-based models.

Even the expensive step of training an AI weather model shows considerable computational savings. One study found the early model FourCastNet could be trained in about an hour on a supercomputer. That made its time to presenting a forecast thousands of times faster than state-of-the-art, physics-based models.

The result of all these advances: high-resolution forecasts globally within seconds on a single laptop or desktop computer.

Research is also rapidly advancing to expand the use of AI for forecasts weeks to months ahead, which helps farmers in making planting choices. AI models are already being tested for improving extreme weather prediction, such as for extratropical cyclones and abnormal rainfall.

Tailoring forecasts for real-world decisions

While AI weather models offer impressive technical capabilities, they are not plug-and-play solutions. Their impact depends on how well they are calibrated to local weather, benchmarked against real-world agricultural conditions, and aligned with the actual decisions farmers need to make, such as what and when to plant, or when drought is likely.

To unlock its full potential, AI forecasting must be connected to the people whose decisions it’s meant to guide.

That’s why groups such as AIM for Scale, a collaboration we work with as researchers in public policy and sustainability, are helping governments to develop AI tools that meet real-world needs, including training users and tailoring forecasts to farmers’ needs. International development institutions and the World Meteorological Organization are also working to expand access to AI forecasting models in low- and middle-income countries.

A man sells grain in Dawanau International Market in Kano, Nigeria on July 14, 2023.
Many low-income countries in Africa face harsh effects from climate change, from severe droughts to unpredictable rain and flooding. The shocks worsen conflict and upend livelihoods.
AP Photo/Sunday Alamba

AI forecasts can be tailored to context-specific agricultural needs, such as identifying optimal planting windows, predicting dry spells or planning pest management. Disseminating those forecasts through text messages, radio, extension agents or mobile apps can then help reach farmers who can benefit. This is especially true when the messages themselves are constantly tested and improved to ensure they meet the farmers’ needs.

A recent study in India found that when farmers there received more accurate monsoon forecasts, they made more informed decisions about what and how much to plant – or whether to plant at all – resulting in better investment outcomes and reduced risk.

A new era in climate adaptation

AI weather forecasting has reached a pivotal moment. Tools that were experimental just five years ago are now being integrated into government weather forecasting systems. But technology alone won’t change lives.

With support, low- and middle-income countries can build the capacity to generate, evaluate and act on their own forecasts, providing valuable information to farmers that has long been missing in weather services.The Conversation

Paul Winters, Professor of Sustainable Development, University of Notre Dame and Amir Jina, Assistant Professor of Public Policy, University of Chicago

This article is republished from The Conversation under a Creative Commons license. Read the original article.

A farmer holds dried-up maize stalks in his field in Zimbabwe on March 22, 2024. A drought had caused widespread water shortages and crop failures.
AP Photo/Tsvangirayi Mukwazhi

By using artificial intelligence, these models can deliver accurate, localized predictions at a fraction of the computational cost of conventional physics-based models. This makes it possible for national meteorological agencies in developing countries to provide farmers with the timely, localized information about changing rainfall patterns that the farmers need.

The challenge is getting this technology where it’s needed.

Why AI forecasting matters now

The physics-based weather prediction models used by major meteorological centers around the world are powerful but costly. They simulate atmospheric physics to forecast weather conditions ahead, but they require expensive computing infrastructure. The cost puts them out of reach for most developing countries.

Moreover, these models have mainly been developed by and optimized for northern countries. They tend to focus on temperate, high-income regions and pay less attention to the tropics, where many low- and middle-income countries are located.

A major shift in weather models began in 2022 as industry and university researchers developed deep learning models that could generate accurate short- and medium-range forecasts for locations around the globe up to two weeks ahead.

These models worked at speeds several orders of magnitude faster than physics-based models, and they could run on laptops instead of supercomputers. Newer models, such as Pangu-Weather and GraphCast, have matched or even outperformed leading physics-based systems for some predictions, such as temperature.

A woman in a red sari tosses pellets into a rice field.

A farmer distributes fertilizer in India.
EqualStock IN from Pexels

AI-driven models require dramatically less computing power than the traditional systems.

While physics-based systems may need thousands of CPU hours to run a single forecast cycle, modern AI models can do so using a single GPU in minutes once the model has been trained. This is because the intensive part of the AI model training, which learns relationships in the climate from data, can use those learned relationships to produce a forecast without further extensive computation – that’s a major shortcut. In contrast, the physics-based models need to calculate the physics for each variable in each place and time for every forecast produced.

While training these models from physics-based model data does require significant upfront investment, once the AI is trained, the model can generate large ensemble forecasts — sets of multiple forecast runs — at a fraction of the computational cost of physics-based models.

Even the expensive step of training an AI weather model shows considerable computational savings. One study found the early model FourCastNet could be trained in about an hour on a supercomputer. That made its time to presenting a forecast thousands of times faster than state-of-the-art, physics-based models.

The result of all these advances: high-resolution forecasts globally within seconds on a single laptop or desktop computer.

Research is also rapidly advancing to expand the use of AI for forecasts weeks to months ahead, which helps farmers in making planting choices. AI models are already being tested for improving extreme weather prediction, such as for extratropical cyclones and abnormal rainfall.

Tailoring forecasts for real-world decisions

While AI weather models offer impressive technical capabilities, they are not plug-and-play solutions. Their impact depends on how well they are calibrated to local weather, benchmarked against real-world agricultural conditions, and aligned with the actual decisions farmers need to make, such as what and when to plant, or when drought is likely.

To unlock its full potential, AI forecasting must be connected to the people whose decisions it’s meant to guide.

That’s why groups such as AIM for Scale, a collaboration we work with as researchers in public policy and sustainability, are helping governments to develop AI tools that meet real-world needs, including training users and tailoring forecasts to farmers’ needs. International development institutions and the World Meteorological Organization are also working to expand access to AI forecasting models in low- and middle-income countries.

A man sells grain in Dawanau International Market in Kano, Nigeria on July 14, 2023.

Many low-income countries in Africa face harsh effects from climate change, from severe droughts to unpredictable rain and flooding. The shocks worsen conflict and upend livelihoods.
AP Photo/Sunday Alamba

AI forecasts can be tailored to context-specific agricultural needs, such as identifying optimal planting windows, predicting dry spells or planning pest management. Disseminating those forecasts through text messages, radio, extension agents or mobile apps can then help reach farmers who can benefit. This is especially true when the messages themselves are constantly tested and improved to ensure they meet the farmers’ needs.

A recent study in India found that when farmers there received more accurate monsoon forecasts, they made more informed decisions about what and how much to plant – or whether to plant at all – resulting in better investment outcomes and reduced risk.

A new era in climate adaptation

AI weather forecasting has reached a pivotal moment. Tools that were experimental just five years ago are now being integrated into government weather forecasting systems. But technology alone won’t change lives.

With support, low- and middle-income countries can build the capacity to generate, evaluate and act on their own forecasts, providing valuable information to farmers that has long been missing in weather services.

Read More

The post AI is transforming weather forecasting − and that could be a game changer for farmers around the world appeared first on theconversation.com



Note: The following A.I. based commentary is not part of the original article, reproduced above, but is offered in the hopes that it will promote greater media literacy and critical thinking, by making any potential bias more visible to the reader –Staff Editor.

Political Bias Rating: Centrist

The content presents a factual and balanced discussion on the use of AI in weather forecasting to aid farmers, particularly in low- and middle-income countries. It emphasizes technological innovation, international collaboration, and practical benefits without promoting a specific political ideology. The focus on climate change and development is handled in a neutral, solution-oriented manner, reflecting a centrist perspective that values science and global cooperation.

Continue Reading

Trending